Rss | TagsSET HOME | ADD TO FAVORITES | 中文网站
Site Location:Index > PRODUCTS > O-Rings > Article
PRODUCTS
CONTACT US

Parker Seals Service Center
TEL:400-0780-010
TEL:+086 010-5719 3966
FAX:+086 010 6786 3250
ADD.:No.67 BDA Beijing China

O-Rings
JIS B2401 O-Ring

JIS B2401 O-Ring

Japanese Industrial Standard 

PRO. CODE:JIS B2401
MODEL NO.:JIS B2401
HITS:49
COMMENT:0
QUOTATION
PRODUCT INTRODUCTION

JIS

DESCRIPTION: O-rings specified by metric dimensions are avaiable in the same rubber material offering as with standard AS 568 dimension o-rings.

The simple geometry is the main characteristic of an O-Ring which, in conjunction with proper elastomer selection, results in a low cost, easy to use and efficient sealing system. Elastomeric materials, when compressed, react like a high viscosity fluid which transmits applied stress in every direction; consequently, the O-Ring serves as a barrier, blocking the leak paths between the sealing surfaces.

• Static seal - The sealing action created between two mating surfaces with no leakage of liquid  or minimal diffusion of gas.
• Dynamic seal - The mating surfaces have relative movement with minimal leakage of liquid  (useful to protect the sealing efficiency, acting as lubricant).

O-Rings offer several advantages over other sealing systems: simplicity of construction, standardized seal dimensions, wide selection of materials, suitability for both static and dynamic applications, standard dimensioning of glands, low cost due to high volume manufacturing. Sealing is always achieved through a positive compression or squeezing action, resulting in a deformation of the O-Ring cross-section. The most important sealing characteristic of an O-Ring is its resistance to compression set or residual deformation.

    TAG:
    Previous: AS 568 O-Ring
    COMMENT
    I WANT TO COMMENT
    INDEX | CONTACT | MESSAGE | SITEMAP